I have new equipment coming in and want to sell a package deal
120" Monza Body .is tinned out with bracing(old fuel car,not a repop.
120" Ron Attebury chassis,will fit large driver(20" inside frame rails)torsion mounted dropped axle with P&S spindles with bearings and two custom brackets that bolt to the bottom of spindles to add single puck brakes to front without welding tabs on spindles.Complete steering with almost new SPE box but it is a stub shaft so you will have to order one from SPE.The seat is a 2 piece fabricated seat.It has the driver enclosure tin with dzus fastners.The original rear mount tabs are on the car and are 21" apart.I believe it had an olds rear originaly.
A bare heavy duty fabricated 9" rear housing is included with MW floater spindles installed.It has four link mounts on it now so you will have to u plate it.It has a jackpad and top bung fill hole with vent.It is heavily braced and was used in a pro mod.
Also come with Crager supertrick wheels,fronts are spindle mount with decent tires and the rears are 15"x12" with 5 on 5 bc and drilled for screws with worn out slicks.I used them to measure.I have a lot of small items that go with it as well,a new 2 filter remote oil system that bolts to the frame as was original,a chrome butterfly wheel with the wood grips,a carbon fiber face plate for gauges,an aluminum sheild that goes on the back of the roll cage,a throttle pedal,Prowerks mounting plate for the steering box.
Also included is an AFT 11"dual disk clutch and steel can.These came from Blaine Johnson's TAD.They are not certified but the clutch can be but not sure of the can.I believe it's a Lakewood.
Price is $8500.00 or Best reasonable offer for all.Come and I'll help you load it up.(540)325-1607
